How to remove ice maker from LG refrigerator?

To remove the ice maker from an LG refrigerator, follow these steps:

1. Unplug the refrigerator from the power source to ensure safety.
2. Locate the ice maker inside the freezer compartment. It is usually attached to the back wall or the side wall.
3. Look for the mounting screws or brackets that hold the ice maker in place. These may be located on the top or bottom of the ice maker.
4. Use a screwdriver or a nut driver to remove the screws or brackets. Keep them in a safe place for reinstallation later.
5. Gently pull the ice maker forward to disconnect it from the water supply line and electrical connections. Be careful not to damage any wires or tubes.
6. Once disconnected, carefully lift the ice maker out of the freezer compartment.
7. If there is excess ice or frost buildup around the ice maker, use a hairdryer on a low heat setting to melt it away. Be cautious not to overheat any plastic components.
8. Clean the ice maker and the surrounding area with a mild detergent and warm water. Rinse thoroughly and dry before reinstalling or storing.
9. To reinstall the ice maker, simply reverse the steps above. Make sure to reconnect the water supply line and electrical connections securely.
10. Plug the refrigerator back into the power source and wait for the ice maker to start producing ice again.

For more detailed instructions or specific information related to your LG refrigerator model, it is recommended to refer to the user manual or contact LG customer support.

Reference:
– LG Support: https://www.lg.com/us/support